This model is discontinued.
|The height of the water column||71 m|
|Performance dry residue (nominal)||800 m³/h|
|Performance dry residue (max)||1600 m³/h|
|Power pump for pumping slurry (nominally)||900 kWh|
|Marine diesel engine САТ С32 Acert, 1200 bhp @ 1800-2000 rpm||850 kWh|
|The cutter 180 kW, 0-30 rpm||1500 mm|
|Length of pipeline (maximum)||2500 m|
|The depth of development (at least)||1,5 m|
|The depth of the development (maximum)||15 m|
|Diameter of the solid particles (maximum)||250 mm|
|Nominal diameter of pipeline||DN500|
|The length of the dredger||36.5 m|
|The length of the pontoons (6 pcs: 13 x 2.5 x 2.3, thickness 8mm, 6mm, cold steel)||26 m|
|The width of the dredge||6.9 m|
|The height of the dredger||7.4 m|
|Weight dredger||190 ton|
|Vessel draft||1250 mm|
|Ballast tanks||60 m3|
|Internal power supply||220-380 V|
|Pontoons (Deadweight 410 m3,)||6 pcs|
|The САТ С32 Acert, 1200 bhp @ 1800-2000 rpm, В-Rate Marine Diesel Engine||1 pc|
|Gearbox CAT 3.55:1||1 pc|
|Pump GRAU 4000/71* (485 rpm, 1500 kw. 450/375 mm)||1 pc|
|Spare impeller||1 pc|
|Frame dredge||1 pc|
|The suction device||1 pc|
|Hydraulic station 180 kw||1 pc|
|Cutter 1500 mm, 180 kW, 0-30 rpm||1 pc|
|Winch for suction pipe||1 pc|
|Spud winches||1 pc|
|Cable Spud||1 pc|
|Water Pump for main Pump||1 pc|
|Pile (spuds)||2 pcs|
|Axulary Engine САТ С13, 440 bhp @ 2100 rpm, С-Rate||1 pc|
|Emergency Generator Weichai, CCFJ40Y-W, 40 kW Water tank cooling||1 pc|
|Emergency Security System||1 pc|
|Emergency Pump||2 pcs|
|Compressors and Receivers, 60 m3||2 pcs|
|Paint 3 layers||1 pc|
|Panton protection||16 pcs|
|Navigation system||1 pc|
|900A batteries||1 pc|
|Residential unit||1 pc|
|The Fuel tank of 8000 liters||1 pc|
|The Water tank of 3000 liters||1 pc|
|The Hydraulic Oil tank of 500 liters||1 pc|
|Crane skid piles, tubes, anchors||1 pc|
|Cathead 3500 kg||1 pc|
|Projectors (led)||8 pcs|
|Surveillance camera 4||1 pc|
|DVR video archiving system||1 pc|
|Depth finder||1 pc|
|Smoke detection system||1 pc|
|Fire extinguishers||4 pcs|
|Air Conditioner||1 pc|
|Repair shop||1 pc|
|A set of tools to service the dredger||1 pc|
|Signal sidelights||7 pcs|
|Emergency water pumping system||1 pc|
|Kit communication devices (radios)||4 pcs|
|Sacrificial protection dredger||16 pcs|
|Audible alarm (relative humidity, smoke, fire)||1 pc|
|Emergency stop button||1 pc|
* – Main pump Description Pump GRT 4000/71
the 1GRT 4000/71 submersible pump is designed for pumping high-abrasive hydraulic mixtures with pH 6 … 12, density up to 1600 kg / m3, temperature from 278 to 333 K (from 5 ° to 60 ° C), volume concentration of solids up to 40%, microhardness up to 11000 MPa. The 1GRT 4000/71 submersible pump should be used for pumping hydraulic mixtures with a particle size of solids up to 40 mm.
The 1GRT 4000/71 soil pump is used in any industry where it is necessary to hydrotransport solids causing intense abrasive wear of the material in contact with them.
Taking into account the requirements imposed on the 1GRT 4000/71 soil pump for durability and operating conditions, the plant manufactures them with a flow-through part of superhard alloys.
1GRT 4000/71 soil pump designed for pumping highly abrasive media.
Scope soil pump 1GRT 4000/71:
· Mining and processing and mining and metallurgical enterprises;
· Thermal power plants;
· Enterprises for the production of cement;
· Diamond and gold mining enterprises;
· Technological lines of crushing, enrichment of minerals, etc.
A distinctive feature of the 1GRT 4000/71 submersible pump is the vertical connector of the outer casing.
Impellers soil pump 1GRT 4000/71 are made with a large number of powerful chisel blades on both disks. The impeller blades are arranged in such a way that they protect the discs from intense wear, as they work similarly to the wheel of a vortex pump. In addition, they prevent the abrasive particles from entering the sinuses between the wheel and the housing of a 1GRT 4000/71 soil pump, ensuring a constant minimum pressure drop in the front seal of a 1GRT 4000/71 soil pump. For efficient operation of the fender blades, the 1GRT 4000/71 submersible pump provides the ability to adjust the gap between the end surface of the fender blades and the front armored disc (without disassembling the pump) using special adjusting studs placed on the glass of the rear bearing block. Wash water is supplied to the space between the wheel and the casing, which carries the soil 1GRT 4000/71 pump out of the sinus between the wheel and the casing.
The 1GRT 4000/71 submersible pump has an internal case made of wear-resistant ICHH28N2 alloy. The 1GRT 4000/71 submersible pump design makes it possible to relatively easily and quickly replace the inner housing, which is subject to wear, consisting of a cochlea and a protective disc.
The impeller is located between the inner casing (rear side) and the protective disk (front side).
The transmission of torque from the electric motor to the 1GRT 4000/71 submersible pump is carried out through an elastic sleeve-and-finger coupling.
Main technical characteristics, 1GRT 4000/71 soil pump:
• Productivity – 4000 cubic meters / hour;
• Head – 71 meters;
• Allowable cavitation margin – 4.8 m
• Impeller diameter – 1390 mm
• The mass of the pump – 15350 kg.
Company Krivorozhmekhservis, LLC, Ukraine
Characteristics of the pump GRT-4000/71 n=485 rpm
The dimensions of the pump with electric engine 1GRT-4000/71
2,718 total views, 2 views today